Undulator position are displayed as disabled during the shutdown
See that undulators are displayed as *DIS*
OH [23]: wa()
Current Positions: user
dial
u18u u27d s1hg[mm] s1ho[mm] s1vg[mm] s1vo[mm] wheel1 mono[deg] x2z[mm]
------ ------ ---------- ---------- ---------- ---------- -------- ----------- ---------
*DIS* *DIS* 0.80 0.12 0.80 -0.13 399.9999 3.567413 7.46507
*DIS* *DIS* 0.80 0.12 0.80 -0.13 42.0000 3.598126 7.46507
At the same time, Spec is able to display this positions.
1942.CINEL> wa
s2hg s2ho tfx tfz tfpitch tfyaw pmoco rmoco u18u_GAP |
s2hg s2ho tfx tfz tfpitch tfyaw pmoco rmoco u18u |
30.000000 -10.066875 -1.274187 0.645272 0.250000 0.282766 0.000000 5.001000 6.047000 |
30.000000 -10.066875 -1.339438 16.819012 0.119609 0.266062 0.000000 5.001000 6.047000 |
|
u27d_GAP u27d_TAPER mtest |
u27d t27d mtest |
200.001000 -0.003000 20.000000 |
200.001000 -0.003000 20.000000 |
And the position is reachable from Jive.
----------------------------------------------------
Attribute: id/master/id06/CPMU18a_GAP_Position
Duration: 14 msec
measure date: 13/10/2023 17:49:41 + 594ms
quality: VALID
Read: 25.001874999999984
Set: 6.04
----------------------------------------------------
Attribute: id/master/id06/CPMU18a_OFFSET_Position
Duration: 1 msec
measure date: 13/10/2023 17:49:56 + 650ms
quality: VALID
Read: -0.3903124999999932
Set: 0.0
Is there a real reason not to display the gap position?
Edited by Valentin Valls