axis panel
- option sinogram should appear only if ScanRange >= 360
- replace "input type" by "data mode"
- replace emission by absorption
- replace "do image scaling" by "scale the two images"
- when selecting transmission/absorption/paganin, radios should change accordingly
- image 2 should be 180 degrees flipped. In this case, compare H and V mode should disappear
- remove Blue/red additive ...
- replace RAW A- B gray mode by "Subtract in B&W mode" (accel = S)
- replace Yellow/cyan ...... by "Subtract in color mode" (accel = C)
- when ticking, changing option or selecting, it is far too long to react.
- pixel values image1: and image2: when cursor outside frame, remove "No data" (and put nothing)
- replace "image1" and "image2" by "radio #1 (closed)" and "radio # 2"
- replace "position" by "center"
- when found, column corresponding to COR should be set in hard yellow on either sino or radios.
- in radio mode, would be better to have all options on the right panel at the same time (instead of 3 tabs)
- replace "Display the first image only" by "display radio #1 (closed)"
- replace "Display the first image only" by "display radio #2 (closed)"
Edited by Christian Nemoz