Commit f03c3500 authored by Roberto Arturo Homs-Regojo's avatar Roberto Arturo Homs-Regojo Committed by Roberto Arturo Homs-Regojo

Update README.md

parent 02b21195
......@@ -21,65 +21,48 @@ You can also find some useful information about the camera
models/prerequisite/installation/configuration/compilation in the
PCO camera plugin \<camera-pco\> section.
Properties
==========
Property name Mandatory Default value Description
---------------- ----------- --------------- --------------------------------------------------------------------
debug\_control No 0 Enable/Disble the debug (0/1)
debug\_module No 0 To set the debug module list (in hex format 0x....)
- None = 0x001
- Common = 0x002
- Hardware = 0x004
- HardwareSerial = 0x008
- Control = 0x010
- Espia = 0x020
- EspiaSerial = 0x040
- Focla = 0x080
- Camera = 0x100
- CameraCom = 0x200
- Test = 0x400
- Application = 0x800
debug\_format No 0 To set the debug format (in hex format 0x....)
- DateTime = 0x001
- Thread = 0x002
- Module = 0x004
- Obj = 0x008
- Funct = 0x010
- FileLine = 0x020
- Type = 0x040
- Indent = 0x080
- Color = 0x100
debug\_type No 0 To set the debug type (in hex format 0x....)
- Fatal = 0x001
- Error = 0x002
- Warning = 0x004
- Trace = 0x008
- Funct = 0x010
- Param = 0x020
- Return = 0x040
- Always = 0x080
params No empty List of parameters/options (one per line)
- sn = \<camera serial number\>
(
if it is 0 or doesn't exist, the first camera found will be opened
if the serial number is not found, OpenCam will fail
)
- trigSingleMulti = 1
(
enable TriggerSingleMulti as TriggerMulti for compability
with SPEC START
)
- xMinSize = 1
(
enable correction for the X minimum size for the CLHS firmware bug
)
- bitAligment = \<MSB | LSB\>
(
bit aligment of the image data, i.e. for 12b:
[MSB - xxxx xxxx xxxx 0000]
[LSB - 0000 xxxx xxxx xxxx]
)
**Properties**
Property name | Mandatory | Default value | Description
------------- | --------- | ------------- | -----------
debug\_control | No | 0 | Enable/Disble the debug (0/1)
debug\_module | No | 0 | To set the debug module list (in hex format 0x....)
. | . | . | - None = 0x001
. | . | . | - Common = 0x002
. | . | . | - Hardware = 0x004
. | . | . | - HardwareSerial = 0x008
. | . | . | - Control = 0x010
. | . | . | - Espia = 0x020
. | . | . | - EspiaSerial = 0x040
. | . | . | - Focla = 0x080
. | . | . | - Camera = 0x100
. | . | . | - CameraCom = 0x200
. | . | . | - Test = 0x400
. | . | . | - Application = 0x800
debug\_format | No | 0 | To set the debug format (in hex format 0x....)
. | . | . | - DateTime = 0x001
. | . | . | - Thread = 0x002
. | . | . | - Module = 0x004
. | . | . | - Obj = 0x008
. | . | . | - Funct = 0x010
. | . | . | - FileLine = 0x020
. | . | . | - Type = 0x040
. | . | . | - Indent = 0x080
. | . | . | - Color = 0x100
debug\_type | No | 0 | To set the debug type (in hex format 0x....)
. | . | . | - Fatal = 0x001
. | . | . | - Error = 0x002
. | . | . | - Warning = 0x004
. | . | . | - Trace = 0x008
. | . | . | - Funct = 0x010
. | . | . | - Param = 0x020
. | . | . | - Return = 0x040
. | . | . | - Always = 0x080
params | No | empty | List of parameters/options (one per line)
. | . | . | - sn = \<camera serial number\> (if it is 0 or doesn't exist, the first camera found will be opened) (if the serial number is not found, OpenCam will fail)
. | . | . | - trigSingleMulti = 1 (enable TriggerSingleMulti as TriggerMulti for compability with SPEC START)
. | . | . | - xMinSize = 1 (enable correction for the X minimum size for the CLHS firmware bug)
. | . | . | - bitAligment = \<MSB or LSB\> (bit aligment of the image data, i.e. for 12b: (MSB - xxxx xxxx xxxx 0000) (LSB - 0000 xxxx xxxx xxxx))
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment