by retrying (only) once the same command
* Manage mixing of BuSY and FAIlure responses in a consistent way
* Added (unused) Reload command in firmware v3.0l
* Added Frelon::SerialLine::getRegCacheValSafe helper

Conflicts:
	src/FrelonInterface.cpp

  by using cache variables and static Firmware const objects
* Implemented (Stripe)Concatenation acq. mode in FrelonAcq,
  allow retrieval of multiple concatenated frames in readFrames

  lines sent in Frelon rois because of the mirror effect

  better debug when setting/getting the SPB2 (HD) config
* Added FrelonAcq.set/getSPB2Config for a full camera control
* Added persistent Frelon::Camera m_roi_bin_offset,
  set in setRoiBinOffset and taken into account in setRoi;
  it is reset when changing the binning or disabling the roi
* Better max. parameter checking in Frelon::Camera::setBin

  when TriggerMode is IntTrig or while Idle (not running),
  implemented through set/getExtSyncEnable methods
* Always call Frelon::Camera::stop at the end of acq.;
  hardware layer acq. status is now given by the camera
* Implement automatic register write retry if seq. is BuSY
* Force an Aurora link reset at startup only if CHAN_UP_LED
  is detected inactive; wait 5 seconds for Frelon AMT resetup
* Added new Sequencer and AMT (SPB2) status commands,
  including getImageCount method
* Test seq. & AMT status at startup; perform HardReset if not idle
* Added SPB2 (HD) Precision/Speed config settings
* Replaced FrelonAcq.set/getKinPars by set/getRoiBinOffset;
  implemented set/getRoiLineBegin
* Removed setting (the ignored) RoiFast in Kinetic RoiMode
* Added E2V_4k / NotMPP chips, as well as the Hamamatsu
  linear detector; implemented (non-tested) variable
  MaxFrameDim depending of the detected chip

  in ExtGateMode as indication of gate duration.
* Ignore a non-null exp. time in Frelon::Camera if in ExtGate.

  ExtGateMode as indication of gate duration.
* Ignore a non-null exp. time in Frelon::Camera if in ExtGate.

  Set final Error Factor to 0.004, giving good correction in lab.

* Added Frelon::E2VCorrection for compensating columns 1023,1024
  (currently a factor 2 is applied for easier validation).
* Created Frelon::Bin/RoiChangedCallback, used in E2VCorrectionUpdate to
  automatically set the hw parameters needed by the correction code.
* Moved Frelon control code from FrelonTacoAcq to FrelonAcq.
* Refactored LimaConvertor.h to simplify management of SIP ctrl objs.
  Macro 'domains' were defined to implement different interface classes:
  HwInterface (HW domain), Frelon::Interface (FRELON domain).
* Implemented SIP Frelon::Interface::getHwCtrlObj
* Fixed bug in CtControl::newFrameReady adding an empty TaskMgr to the
  process queue of the PoolThread.
* Added CtImage::setFlip to SIP interface
* Make Frelon::Camera::getInputChanModeName a static member function
* Removed extra Copyright/License header from:
  LimaConvertor.h, global.inc and espia.inc

* Added Frelon::E2VCorrection for compensating columns 1023,1024
  (currently a factor 2 is applied for easier validation).
* Created Frelon::Bin/RoiChangedCallback, used in E2VCorrectionUpdate to
  automatically set the hw parameters needed by the correction code.
* Moved Frelon control code from FrelonTacoAcq to FrelonAcq.
* Refactored LimaConvertor.h to simplify management of SIP ctrl objs.
  Macro 'domains' were defined to implement different interface classes:
  HwInterface (HW domain), Frelon::Interface (FRELON domain).
* Implemented SIP Frelon::Interface::getHwCtrlObj
* Fixed bug in CtControl::newFrameReady adding an empty TaskMgr to the
  process queue of the PoolThread.
* Added CtImage::setFlip to SIP interface
* Make Frelon::Camera::getInputChanModeName a static member function
* Removed extra Copyright/License header from:
  LimaConvertor.h, global.inc and espia.inc

Conflicts:
	common/src/RegExUtils.cpp
	common/test/testregex.cpp
	control/src/CtSaving_Edf.cpp

Conflicts:
	camera/simulator/test/testsimulator.cpp
	common/src/Makefile
	control/include/CtControl.h
	control/include/CtImage.h
	control/src/CtControl.cpp
	hardware/include/HwBufferSave.h

changed makefile to include Processlib/core/include only for compatibility with Windows (Compatibility.h)
Todo see if it can be do in better way

Conflicts:
	control/include/CtControl.h
	control/src/CtControl.cpp
	control/src/Makefile

* Improved Frelon::Camera shutter exception messages

* Implemented SIP retrieval of HwShutterCtrlObj from HwInterface

  updated Simulator, Focla, Frelon and Maxipix
* Added HwShutterCtrlObj::checkMode
* Implemented Frelon::ShutterCtrlObj using Camera::set/getShutMode

  search; used in Interface::reset and Camera::setFrameTransferMode
* Check RoiMode in set/getRoiBinBinOffset

* Set Frelon::Camera NbFrames to 1 if trig_mode is ExtGate
* Send Frelon::Camera Stop cmd only of if NbFrames > 1

git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@346 45c4679d-1946-429d-baad-37912b19538b