Commit 08cf60b7 authored by Laurent Claustre's avatar Laurent Claustre

Moved tango plugin documentation from applications/tango/python to here

parent 84032003
Pipeline #12765 passed with stages
in 10 minutes and 18 seconds
Andor Tango device
=====================
This is the reference documentation of the Andor Tango device.
you can also find some useful information about prerequisite/installation/configuration/compilation in the :ref:`Andor camera plugin <camera-andor>` section.
Properties
----------
================= =============== =============== =========================================================================
Property name Mandatory Default value Description
================= =============== =============== =========================================================================
adc_speed No max. The adc/Horiz. speed pair
baseline_clamp No Off Clamping for baseline threshold, ON or OFF
camera_number No N/A The camera number, default is 0
cooler No Off Start/stop the cooling system of the camera mode
config_path No N/A The configuration path, for linux default is /usr/local/etc/andor
fast_ext_trigger No Off Fast external trigger mode, see Andor documentation for usage
fan_mode No N/A FAN mode, FAN_ON_FULL/FAN_ON_LOW/FAN_OFF
high_capacity No High_capacity Camera can run in two modes, HIGH_CAPACITY or HIGH_SENSITIVITY
p_gain No max. The preamplifier gain [X1-Xn] (see detector spec.)
shutter_level No High The shutter output level mode
temperature_sp No N/A The temperature setpoint in Celsius
vs_speed No fasten The vertical shift speed (see detector spec.)
================= =============== =============== =========================================================================
Attributes
----------
======================= ======= ======================= ======================================================================
Attribute name RW Type Description
======================= ======= ======================= ======================================================================
adc_speed rw DevString The ADC and Horizontal shift speed, in ADCchannel/Freq.Mhz, check
the documentatio for more help **(\*)**
baseline_clamp rw DevString The baseline clamping for threshold: **(\*\*)**
- **ON**
- **OFF**
cooler rw DevString Start/stop the cooling system of the camera mode:
- **ON**, the cooler is started
- **OFF**, the cooler is stopped
cooling_status ro DevString The status of the cooling system, tell if the setpoint
temperature is reached
fan_mode rw DevString The FAN mode for extra-cooling: **(\*\*)**
- **FAN_OFF**
- **FAN_ON_FULL**
- **FAN_ON_LOW**
fast_ext_trigger rw DevString Fast external trigger mode, see Andor documentation for usage Mode are:
- **ON**, fast mode, the camera will not wait until the a keep clean cycle has been completed before accepting the next
trigger
- **OFF**, slow mode
high_capacity rw DevString Off/On the High Capacity mode: **(\*\*)**
- **HIGH_CAPACITY**
- **HIGH_SENSITIVITY**
p_gain rw DevString The preamplifier gain from X1 to Xn (see detector spec.) **(\*)**
shutter_level rw DevString The shutter output level mode:
- **LOW"**, output TTL low signal to open shutter
- **HIGH**, output TTL high signal to open shutter
temperature ro DevShort The current sensor temperature in Celsius
temperature_sp rw DevShort The temperature setpoint in Celsius
timing ro Spectrum The exposure and latency times
vs_speed rw DevString The vertical shift speed, in us/pixel **(\*)**
======================= ======= ======================= ======================================================================
**(\*)** Use the command getAttrStringValueList to get the list of the supported value for these attributes.
**(\*\*)** These attributes can not be supported by some camera models and the return value will be set to **UNSUPPORTED**.
Commands
--------
======================= =============== ======================= ===========================================
Command name Arg. in Arg. out Description
======================= =============== ======================= ===========================================
Init DevVoid DevVoid Do not use
State DevVoid DevLong Return the device state
Status DevVoid DevString Return the device state as a string
getAttrStringValueList DevString: DevVarStringArray: Return the authorized string value list for
Attribute name String value list a given attribute name
======================= =============== ======================= ===========================================
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment