* Added CtControl::SaveOpen/CloseErrors for more specific error desc.
* Fixed CtSaving missing/incomplete exception catch points for
  open/write/close operations, not properly reporting a saving error
* Restored multiple save file open retries before throwing exception
* Allow CtSaving::writeFrame to save concatenated frames (stripes)
  as a single image
* Fixed CtImage Roi software rotation/flip code not taking into account
  current hardware binning
* Added Roi::complementX/Y helper to simplify getFlipped/[Un]Rotated

Espia:
* Improved Espia::Dev::open error message when
  driver is not loaded or board not present
* Perform Espia::Acq::setupSGRoi only if the corresponding
  memory buffers have been already allocated

Frelon:
* Implemented Frelon::Camera::waitIdleStatus, to be called
  after a Stop command is sent, using getMaxIdleWaitTime,
  which includes in the internal exposure time if 2.x <= FW < 3.0
* Added Frelon::Camera::syncRegsBadHTD to improve
  initialisation sequence if 2.x <= FW < 3.0:
  + If camera is not idle and not in ExtGate, send a Stop command
  + Always attempt to wait for idle status
  + Force an Aurora link reset on startup to trigger
    FPGA reconfiguration, solving blocking problems
  + Added Frelon::Model::hasHTDCmd (from v2.0c on), used to force
    hardware trigger enabled
* Improved Frelon::Camera::setExpTime:
  + Better error detection and simpler sequence
  + Round to MinExp (1 us) if positive but less than that
  + Only use Microseconds TimeUnit if Milliseconds is not precise enough
* Do not start Frelon::Camera if already started
* Better debug around waitIdleStatus in Frelon::Camera::stop,
  printing real time spent waiting
* Activate Espia SG Roi in Frelon::RoiCtrlObj::checkEspiaRoi only
  if Camera Roi is different than requested one
* Export to FrelonAcq new CtSaving feature allowing to manually
  save multiple concatenated frames (stripes) as a single image

TACO:
* Implemented TACO call DevCcdWriteAll, saving concatenated
  frames (stripes) as a single image
* Added espia_dev_nb resource to allow multiple Espia boards

TANGO/Common:
* Added CtControl SaveOpen/CloseError codes in LimaCCDs state desc.

* Fixed check-write-access problem when idx is not at end of file name.
* Added multi-stream access in [Taco]FrelonCdd/Acq: DevCcdSet/GetExtFilePar
* Allow call to FrelonAcq.setE2VCorrection active (FrelonTacoAcq.setMode)
  during acquisition if not changing the status
* Added CtVideo patch for Python 2.4

- some small lifting for Pilatus
- add cbflib as a third-party project


git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@259 45c4679d-1946-429d-baad-37912b19538b

 - add one methode in CtControl to retrived the hardware interface
 - fix a python compilation problem with the PriamAcq
 - add the first untested Tango device server
 - fix some bug in pilatus Interface and Communication


git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@238 45c4679d-1946-429d-baad-37912b19538b

- add some trace
- wrapp CtSaving::getWriteTimeStatistic
- Pilatus::BufferCtrlObj remove print and fix some bugs


git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@234 45c4679d-1946-429d-baad-37912b19538b

* set the size of soft. bin/roi given by CtImage::getImageDim() 
  in Data returned by CtControl::Read[Base]Image()
* added missing sip /Out/ annotation in CtControl::Read[Base]Image
  and CtImage::getImageDim
* implemented most of the FrelonTacoCcd basic functionality:
  state/status, bin/roi, exp_time/nb_frames, FTM/input_chan, 
  autosave/filepars, start/stop/current/read


git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@205 45c4679d-1946-429d-baad-37912b19538b

git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@202 45c4679d-1946-429d-baad-37912b19538b

git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@153 45c4679d-1946-429d-baad-37912b19538b

	-> statistics
	-> clear
	-> save processlib data header


git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@141 45c4679d-1946-429d-baad-37912b19538b

* implemented frame accumulation (callbacks) in BufferCtrlMgr
* added HwRoiCtrlObj, implemented Frelon Rois
* using SoftRoi processlib task in testfreloninterface
* moved checkBin to Frelon::Camera
* added Roi-of-Roi (subRoi) management
* fixed and added new sip files; first full lima module in Python
* implemented some missing functions (HwShutterCtrlObj, BufferSave)
* added LimaConvertor.h with HwCap to CtrlObj conversion
* added global build directory with liblima.so; compiling code with -fPIC
* added HwFrameInfo::isValid method



git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@110 45c4679d-1946-429d-baad-37912b19538b

git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@89 45c4679d-1946-429d-baad-37912b19538b

-> simplify sip wrapping


git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@88 45c4679d-1946-429d-baad-37912b19538b

git-svn-id: https://scm.blissgarden.org/svn/lima/trunk@86 45c4679d-1946-429d-baad-37912b19538b