Added values specific for a Beamline

ID21 wants to store the beamline configuration that is actually an interpretation of the values of the motors. This is the list of things that they want to store and specially Summary are the important ones.

Summary for "start" (Wed Jun 21 08:06:51 2017):
 SR mode: 7/8 multibunch
 Undulators: gu42d, gu42m
 M0 coating: Nickel
 Monochromator: Si(111)
 Energy: 7.30011 keV
 RC diode: Out
 Pinhole: None
 Attenuator: None
 I0 (Si3N4): Out
 I0 (Ti): In
 KB: In
 OSA: 60um
 sdd (60deg): In (inactive)
 fdet: Out
 idet: In (KB)
 pco: In (inactive)

Data being saved:
 Experiment dir: /data/visitor/hc3130/id21/
 Experiment type: sxm
 Data dir: /data/visitor/hc3130/id21/align/align_0500/
 Data radix: align_0500
 Spec file: /data/visitor/hc3130/id21/align/align_spec01/align_spec01.dat
 Spec next number: 1
 ZAP dir: /data/visitor/hc3130/id21/align/align_0500/zap
 ZAP radix: align_0500
 ZAP next number: 1

Detectors:
 xrf:
  config: config_sgx_leia_05us_025us_oct15_5evbin.ini
  description: SGX
   windows: Be (25 um)
   distance: 60.5 mm
   active area: 80 mm^2
   solid angle: 0.021743 srad
   angle in: 62 deg
   angle out: 49 deg
   motors: sddy = 0
 xrf diode:
  out-of-plane: 62.9969 mm
   motors: fdetz = -66.9969

Counters:
 x1_00 = 380 - 420 (P)
 x1c_00 = 380 - 420 (P_dt)
 x2_00 = 440 - 480 (S)
 x2c_00 = 440 - 480 (S_dt)
 x3_00 = 1230 - 1310 (Fe)
 x3c_00 = 1230 - 1310 (Fe_dtc)
 arr_absorp1 = -ln(idet/iodet)
 arr_absorp2 = x1c_00/iodet
 arr_absorp3 = x2c_00/iodet

Positions:
   gu42d = 35.99  gu42m = 35.7509  gu32u = 70  m2angle = 15.4851
    sshg = 1.5  ssvg = 1.5  ssho = 0.69  ssvo = 0.058 
    jjhg = 0.3  jjvg = 0.3  jjho = 1.91001  jjvo = 0.789987 
 r2theta = -0.0816008  r2gamma = -0.454996  mono = 15.7143
     zpy = -2.76  zpz = 7.45993  kbhf = 0.14285  kbvf = -0.507975
    vlmx = 1.57  vlmy = 4.645  vlmz = 2.427

Wago:
 kbvf = -5.09714 mrad
 kbhf = 1.48166 mrad

Flux:
 Current: 199.178 mA
 I0: 59997/s (gain = 1e7 V/A)
 It: 76531/s (gain = 1e5 V/A)
 Photons: 2.44785e+10/s