New parameters for BM29 (SAXS)

1. Sample Changer mode (per sample/buffer)

• Beamline [BM29 at ESRF]: beamlineID
• ring current [mA]: InstrumentSource_current
• detector [Pilatus3 2M], pixel size x/y [172 microns]: SAXS_pixelSizeX, SAXS_pixelSizeY
• sample-to-detector distance [m]: SAXS_detectorDistance
• beam center [X, Y]: SAXS_beam_center_x, SAXS_beam_center_y
• energy [keV]: SAXS_energy [NEW]
• wavelength [keV]: SAXS_waveLength
• transmission [%]: SAXS_transmission [NEW]
• number of frames: SAXS_numberFrames (for BM29 this are separate images, not the number of frames which are added to form one image)
• time per frame [s]: SAXS_timePerFrame
• storage T [C]: "temperature of the sample storage unit"
• exposure T [C]: "temperature of the sample during acquisition"
• snapshot of capillary before/after run: ./gallery/before.png, ./gallery/after.png

2. HPLC mode (per run)

• Beamline [BM29 at ESRF]: beamlineID
• ring current [mA]: InstrumentSource_current
• energy [keV]: SAXS_energy [NEW]
• wavelength [keV]: SAXS_waveLength
• transmission [%]: SAXS_transmission [NEW]
• detector [Pilatus3 2M], pixel size x/y [172 microns]: SAXS_pixelSizeX, SAXS_pixelSizeY
• sample-to-detector distance [m]]: SAXS_detectorDistance
• beam center [X, Y]: SAXS_beam_center_x, SAXS_beam_center_y
• number of frames: SAXS_numberFrames
• time per frame [s]: SAXS_timePerFrame
• exposure T [C]: "temperature of the sample during acquisition"
• column [ex. Agilent BioSEC 130]: "HPLC column type"
• flow rate [ml/min]: "HPLC flow rat"
• port [A/B/C/D]: "HPLC injection port"
• UV data (4 wavelength extracted from .H5 into an ASCII file): processed data (Bliss 1.11)
• snapshot of capillary before/after run: ./gallery/before.png, ./gallery/after.png