In firmware:

- Change FTDI FIFO pinout constraints to match those of rev B

In software:
- Check for correct device description name (rev B) in daq class when establishing the connection to the FTDI FIFO

firmware/PETA/hdl/constraints/top.xdc

@@ -37,7 +37,7 @@ set_property PACKAGE_PIN K4 [get_ports ASIC_RESET_N]
 
 
 
-set_property PACKAGE_PIN C18 [get_ports {FTDI\.CLK}]
+set_property PACKAGE_PIN C19 [get_ports {FTDI\.CLK}]
 set_property PACKAGE_PIN E21 [get_ports {FTDI\.TXE_N}]
 set_property PACKAGE_PIN F21 [get_ports {FTDI\.RXF_N}]
 set_property PACKAGE_PIN B22 [get_ports {FTDI\.WR_N}]
@@ -61,7 +61,7 @@ set_property PACKAGE_PIN B15 [get_ports {FTDI\.DATA[10]}]
 set_property PACKAGE_PIN B16 [get_ports {FTDI\.DATA[11]}]
 set_property PACKAGE_PIN B17 [get_ports {FTDI\.DATA[12]}]
 set_property PACKAGE_PIN B18 [get_ports {FTDI\.DATA[13]}]
-set_property PACKAGE_PIN C19 [get_ports {FTDI\.DATA[14]}]
+set_property PACKAGE_PIN C18 [get_ports {FTDI\.DATA[14]}]
 set_property PACKAGE_PIN C14 [get_ports {FTDI\.DATA[15]}]
 set_property PACKAGE_PIN C15 [get_ports {FTDI\.DATA[16]}]
 set_property PACKAGE_PIN D16 [get_ports {FTDI\.DATA[17]}]

tools/clients/sus/daq/daq.py

@@ -111,7 +111,8 @@ class dataMiner(qtc.QObject):
 
 
 class daq():
-    DEV_DESC = b'PETA DriverBoard rev.C FIFO'
+    #DEV_DESC = b'PETA DriverBoard rev.C FIFO'
+    DEV_DESC = b'PETA DriverBoard rev.B FIFO'
     SYNC_WORD = np.array([103,69,35,1]) 
     DATA_OFFSET = 1                                 # DATA FROM FTDI FIFO IS INCREASED BY 1 IN FIRMWARE TO AVOID ZERO SUPPRESSION FROM FTDI
     NB_FES = 16