Commit 9f492340 authored by Vincent Michel's avatar Vincent Michel Committed by U-ESRF\opid00

Add xmap configuration

parent 0ab803ff
Pipeline #753 passed with stages
in 54 seconds
......@@ -79,4 +79,4 @@ void xiaMemSetCheckpoint(void);
void xiaMemLeaks(char *);
""")
handel = ffi.dlopen("handel/handel.dll")
handel = ffi.dlopen("handel.dll")
[detector definitions]
START #0
alias = detector1
number_of_channels = 1
type = reset
type_value = 1.000
channel0_gain = 1.500000
channel0_polarity = +
END #0
[firmware definitions]
START #0
alias = firmware1
filename = C:\Program Files (x86)\XIA\ProSpect_MERC_1.0.42\firmware\mercury\mercury_reset.fdd
fdd_tmp_path = C:\Users\opid00\AppData\Roaming\XIA LLC\ProSpect\fddtemp\
num_keywords = 0
END #0
***** Generated by Handel -- DO NOT MODIFY *****
[default definitions]
START #0
alias = defaults_module1_0
peaking_time = 0.500000
minimum_gap_time = 0.060000
adc_percent_rule = 5.000000
dynamic_range = 47200.000000
calibration_energy = 5900.000000
mca_bin_width = 10.000000
trigger_threshold = 158.447266
baseline_threshold = 252.075195
energy_threshold = 0.000000
preset_type = 0.000000
preset_value = 0.000000
detector_polarity = 1.000000
reset_delay = 1.000000
decay_time = 1.000000
preamp_gain = 1.500000
number_mca_channels = 2048.000000
gap_time = 0.240000
trigger_peaking_time = 0.100000
trigger_gap_time = 0.000000
maxwidth = 1.000000
baseline_average = 256.000000
preamp_type = 0.000000
number_of_scas = 0.000000
mapping_mode = 1.000000
gate_ignore = 0.000000
delta_temp = 0.500000
temp_correction = 0.000000
peak_mode = 0.000000
trigger_output = 0.000000
livetime_output = 0.000000
calibrated_gain = 0.000000
calibrated_dac = 0.000000
calibrated_checksum = 0.000000
gain_slope = 0.000000
num_map_pixels = 10.000000
num_map_pixels_per_buffer = 0.000000
input_logic_polarity = 1.000000
END #0
***** End of Generated Information *****
[module definitions]
START #0
alias = module1
module_type = mercury
interface = usb2
device_number = 0
number_of_channels = 1
channel0_alias = 0
channel0_detector = detector1:0
firmware_set_chan0 = firmware1
default_chan0 = defaults_module1_0
END #0
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment