Commit 3bde6ebf authored by Perceval Guillou's avatar Perceval Guillou
Browse files

add regul doc ramp_from_pv

parent 76a97029
Pipeline #48241 passed with stages
in 8 minutes and 58 seconds
......@@ -474,6 +474,23 @@ If `loop.output.ramprate != 0` then any new value sent to the output will use a
The output ramping is useful when the hardware must be protected against brutal variations (like a high voltage output).
By, default the output ramprate is set to zero.
!!! Note
While setting a new setpoint, some controllers will compute the ramp from the last setpoint or working setpoint instead of the current process value.
If the current process value is far from the working setpoint, this could lead to a unwanted ramp and dangerous overshoots.
To prevent this, by default, the framework forces the controller to compute the new ramp from actual process value by setting the setpoint to current process value just before applying the new setpoint asked by the user. This behavior can be deactivated by setting the loop attribute `loop._force_ramping_from_current_pv` to `False`.
This can be done in the loop YML configuration with the key `ramp_from_pv`.
``` yml
- name: ls336l_1 # one loop
input: $ls336_B # a reference to one of the inputs above
output: $ls336o_1 # a reference to one of the outputs above
channel: 1
ramp_from_pv: False
### Scanning
The Loop object has a special method `Loop.axis` that returns the loop as an `Axis`.
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment